Instructions

Ax350_06a_oi_e.docx / Aug-19 page 16 / 78
Screen structure in operation
The following screens are available during operation. Depending on the device version and the
selected operation mode, not all displays will be shown.
The source (IN1, IN2, …) for the single channel display, the two channel display and the large display
are defined in the DISPLAY MENU.
Single line display with unit and status bar
To switch to the next display,
press the touch screen.
Control - or Relay status are only shown
with Option AO, CO, RL.
Two-line display
To switch to the next display, press the
top of the screen.
Two-line display with units
To switch to the next display, press the
top of the screen.
Large Display (4 digits)
To switch to the next display, press the
top of the screen.
This is only possible with activated
parameter „LARGE DISPLAY“.