Datasheet

No.
No.
外形安裝時按圖要求(附外觀圖)電機應清潔無汙,表
to this item We will be confer with each other
參考隨附特性曲線圖
See characteristic chart attached
面無碰傷變形及明顯刮傷痕,塗鍍層無剝落,緊配部件
4.電機的機械特性:Mechanical Characteristics
項目:Items 規格:Specifications
4-1
絕緣電阻:
Electrical Noise
參考特性曲線:
Reference Characteristic Curves
馬達端子與金屬外殼之間的電阻最小1.0 MΩ/DC100V
Insulation Resistance
1.0MΩ min. (DC100V)
between motor terminal and motor metal housing
電氣噪音:
３-10
于此項有異議由雙方協定之
３-8
3-9
To be equipped with varistor when happened doubt
4-2
Shaft End Play
軸向間隙:
0.05-0.30mm
be fixed firmly
應牢固.
As per the dimensional drawing No remarkable
deformation or superfical defects to be
observed by visual check. Fastened parts to
馬達裝置方向:
Motor Position
３-6
３-7
堵轉電流:
710g.cm(min) at rated voltage.
堵轉力矩:
Stall Current
額定電壓下最小為710g.cm
0.20A max
Stall Torque
最大0.20A
３-5
空載起動電壓:
Starting Voltage
無負載下最大0.6V
0.6V(max) no load
３-4
額定電壓額定負載條件下轉速:
Rated Load Speed
8 rpm±20%
３-3
額定電壓額定負載條件下電流: 最大60mA
Rated load Current 60mA max
10 rpm±20%
３-1
額定電壓無空載條件下電流: 最大32mA
No Load Current 32 mA max
3.電氣特性：Electrical Characteristics
項目:Items 規格:Specifications
SPEC No:SG-008Y0204
樣品規格
PAGES: ２
DATE:2008-02-28
SPECIFICATIONS
３-2
額定電壓無空載條件下轉速:
No Load Speed
認定雙方均能接受的標准.
To be set up with mutual consent
EDITION: A1
4-3
重量:
Weights
4-4
振動:
Vibration
約9.2g
Approx9.2g