Owner's manual

System Features and Functions
The front of the TRANSTECH III cabinet contains the control panel, the uid ll neck for adding new transmis-
sion uid and the uid level windows.
Front View - Control Panel Features and Functions
New Feature: Whenever the TransTech is reset with uid in the waste tank, the Empty Waste LED will ash.
Note: It is not necessary to empty the Waste Tank before performing an exchange. If beginning an ex-
change with uid in the waste tank ensure that there is less uid in the clean tank than the remaining capacity
of the waste tank. Failure to do so will result in Waste Tank overowing!
[e-mail] www.motorvac.com
3
A
B G H
I
C
D
J
E
F
A. Start / Resume
(Fluid Exchange)
Begins service - Starts exchanging new uid for used uid. NOTE: With DRAIN, FILL, and ENGINE START
light on, service is in progress.
B. Drain
Drains uid from vehicle’s transmission. When performing lter change, an alarm will sound when the
transmission is empty.
C. Low Vehicle Fluid
lluminates when uid from the vehicle in service is low or empty.
D. Complete
Illuminates when service is complete or the stop button has been pressed
E. Start Engine
Flashes when the vehicle’s engine needs to be started, Is on solid when the vehicle’s engine is running and
sufcient ow is seen from the transmission.
F. Stop Engine
Flashes when the vehicle’s engine needs to be stopped,
Is on solid when the vehicle’s engine is OFF.
G. Fill (Top Off)
Adds uid to the transmission.
H. Low Clean Fluid Illuminates when clean uid in the unit’s clean tank is empty.
I. Stop
Stops alarm if alarm is sounding.
Pauses the service if alarm is not sounding. Press Change Fluid button to resume service.
J. Empty Waste
Empties used waste uid from unit’s waste tank.