Owner's manual

info@motorvac.com www.motorvac.com
Introduction
Congratulations on your selection of the TRANSTECH III Transmission Service System. By choosing this
product, you are acquiring the most technologically advanced method available for automatic transmission
service and uid exchange.
The TRANSTECH III System is a self-contained system; designed to connect to any automatic transmission
through its cooling system lines. Once the unit is connected, it can be used to drain the uid from the ve-
hicle’s transmission for lter replacement and/or to completely exchange the transmission uid with new uid,
without removing the vehicle’s transmission uid pan.
With the engine idling, the unit will receive the used uid expelled by the vehicle’s transmission uid pump
through one of the hoses connected to the transmission cooling system, and supplies new uid through the
second hose connected to the other side of the disconnected transmission cooling line.
It is recommended that a vehicle’s transmission lubrication system according to the vehicle owner’s manual
to obtain the highest lubricant protection, to reduce friction from internal transmission components, and thus
increase the efciency and life span of the transmission.
Please study this Operators Manual to become thoroughly familiar with the TRANSTECH III Transmission
Service System.
IMPORTANT
The TRANSTECH III Transmission Service System is designed to work
EXCLUSIVELY with transmission uid and MotorVac brand chemicals.
Any operational failure through the use of other products (except automatic transmission uid)
in the TRANSTECH III System voids the manufacturer’s warranty.
See warranty card for details.
1