Quick Start

START 3
Start
Charge
Insert the charger into the charger port on
the bottom of the tablet.
Set up
1 Press and hold Power/Lock on the back
of your tablet to turn it on.
Tip: In the unlikely event that your tablet
becomes unresponsive, try a forced
reboot—press and hold both
Power/Lock and the up volume key for
three seconds.
2 To change the language, touch .
3 Touch
Start .
Note: If your tablet has mobile network service, it should activate now. If activation is
successful, touch
Next . If activation is cancelled or fails, touch Back to go back, touch Activate
to try again, or touch
Skip to skip activation and go on to Wi-Fi setup.
4 In the
WiFi setup screen, you can connect to an existing network, add a new network, or skip
Wi-Fi setup for now and set up later (see “Settings & Connections” on page 7).
Caution: Before assembling, charging or using your product for the first time, please read
the important Safety, Regulatory & Legal information provided with your product.
Caution: Only use the charger that came with your tablet. Do NOT attempt to connect a
charger to the Micro USB connector—this is for data transfer only.
Note: The battery should only be replaced by a Motorola-approved service facility. Any
attempt to remove or replace your battery may damage the product.
Battery Charging Indicator