Specifications
Table Of Contents
- Patents
- Revision History
- Table of Contents
- About This Guide
- Getting Started
- Accessories
- ActiveSync
- Voice Only WT4090 Remote Control
- Wireless Applications
- Introduction
- Signal Strength Icon
- Turning the WLAN Radio On and Off
- Find WLANs Application
- Profile Editor Wizard
- Wireless Status Application
- Wireless Diagnostics Application
- Options
- Persistence
- Registry Settings
- Log On/Off Application
- Using Bluetooth
- Application Deployment
- Staging and Provisioning
- Special Considerations
- Maintenance & Troubleshooting
- Technical Specifications
- Glossary
- Index
Special Considerations 9 - 3
4. Select OK.
Wireless LAN
To set the WLAN radio to maximum performance:
1. Select the wireless icon in the bottom lower right corner.
2. Select Manage Profiles.
3. Select your wireless profile, double click.
4. Select Edit.
5. Continuously select Next until the Battery Usage window appears.
6. Ensure the MAX Power Save radio button is selected.
Voice Only WT4090 LED Considerations
•
Application developers for the Voice Only WT4090 should not program all LEDs to be turned on at the same
time, as this sequence is reserved for IPL mode.
•
Do not turn off the display backlight or the keypad backlight as this will turn off the Application Controlled LED
and the WLAN Status LED, respectively.
•
Consider device battery life when programming LED blinking. Refer to the EMDK Help file WT4090-VOW
Programming page for more information.