Motorola Remote Control Solution for WT4090 VOW Device Software Installation Guide
Motorola Remote Control Solution for WT4090 VOW Device Software Installation Guide 72E-133492-02 Revision B March 2010
© 2010 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Table of Contents Before You Begin................................................................................................1 Read This First................................................................................................................................................ 1 About the Guide .............................................................................................................................................. 1 Related Documents ......................................
vi –MRCS for WT4090 VOW Device Software Installation Guide
19 Before You Begin Read This First Motorola recommends that you read this entire document before you begin installing the Motorola Remote Control Solution (MRCS) for the WT4090 voice-only wearable VOW device. About the Guide The Motorola Remote Control Solution for WT4090 VOW Device Software Installation Guide provides general instructions for installing the Motorola Remote Control Solution (MRCS) for the WT4090 Voice Only Wearable (VOW) Device.
2 MRCS for WT4090 VOW Device Software Installation Guide • Software license information Motorola responds to calls by email, telephone, or fax within the time limits set forth in support agreements. If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business partner for support.
3 -- MRCS for WT4090 VOW Device Software Installation Guide Chapter 1 – Delivery Method and Minimum Requirements Delivery Method MRCS for the WT4090 VOW is a software-only release in an msi setup package. The JRE 1.6 Java runtime environment is required for the MRCS desktop component and is included with the msi setup package. The installer will check for the valid JRE version and install it if necessary.
4 MRCS for WT4090 VOW Device Software Installation Guide Category Requirements Hardware These are only recommendations and you may obtain satisfactory performance on computers with a configuration that differs from these specifications.
Chapter 2 – Installing MRCS Uninstall Previous Versions Uninstall any previous versions of MRCS before installing the latest version. Note: If the MRCS is already installed, double clicking on the MRCS setup package will uninstall the existing version.
Installing MRCS To Install MRCS: 1. Download the setup package. 2. Locate MRCS_Setup.exe and double-click the file to display the Installation Wizard (Figure 1). Figure 1 3. Click Next to display the license agreement (Figure 2).
4. Accept the license agreement and click Next to display the Destination Location dialog box (Figure 3). Figure 3 5. Accept or change the Destination folder and click Next. 6. If the required version of JRE 6o IS NOT installed, the Java Setup Progress dialog box (Figure 4) will display and install the appropriate JRE 6 version before the MRCS Setup Status dialog box (Figure 5) is shown for installing MRCS.
Figure 5 o IS installed, the MRCS Setup Status (Figure 5) dialog box will display and MRCS will be installed. 7. Once the installation is complete, the following MRCS files will be created in the folder where the user has installed MRCS (e.g., Under “C:\Program Files\Motorola\MRCS”). The files created are: Table 2 – Files Created at Installation Name Description DesktopDLL.dll DLL needed to initiate the native calls to the device mrc_signed.
Note: In order to use the MRCS in a standalone (ActiveSync mode), make sure ActiveSync is properly connected between the device and the local system PC. Installing MRCS on a Device To install MRCS on a device 1. Use Motorola Remote Control shortcut in the desktop or use Start -> All Programs -> Motorola -> MRCS -> Start Motorola Remote Control. Figure 6 2. Ifo MRCS is not installed on the device, installation will be automatic.
Figure 7 Figure 8 3.
Table 3 – Files Created on the Device Name Description MRC.exe This is the MRCS executable running in the device side. At a time only one instance will be running. Config.xml MRC_Start.RUN msg.properties MrcAES.dll MrcCleaner.exe Logs This file contains the configuration details of the MRCS in the device side.
1. Click Start > Control Panel -> Add/Remove Programs. 2. Highlight “Motorola Remote Control Solution” 3. Click Remove on the MRCS Install Point listing to uninstall MRCS To uninstall MRCS using MRCS setup package 1. Double click on the MRCS setup package. 2. Confirm uninstall message 3.
Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http:/motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © MOTOROLA, Inc.
