Specifications

Network Setup 4-15
2. Select the Configuration tab and click the Edit button.
The screen displays with the name of the VLAN in the upper left-hand side. The VLAN ID cannot be
modified and should be used to associate the VLAN ID with the description and IP address assignments
defined.
3. Unselect the Use DHCP to obtain IP Address automatically checkbox to assign IP addresses
manually and do not want DHCP to provide them.
4. Use the IP Address field to manually enter the IP address for the virtual interface.
5. Enter the Subnet Mask for the IP address.
6. Select the Set as Management Interface checkbox to convert the selected VLAN ID as management
interface.
7. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.
4.4.2 Viewing Virtual Interface Statistics
The Statistics screen displays information from the switch software and hardware modules about the
packet level statistics and errors at the interface defined.
To view virtual interface statistics:
1. Select Network > Switch Virtual Interface from the main tree menu.