Specifications

Network Setup
This chapter describes the Network Setup menu information used to configure the switch. This chapter
consists of the following sections:
• Displaying the Network Interface
• Viewing Network IP Information
• Viewing and Configuring Layer 2 Virtual LANs
• Configuring Switch Virtual Interfaces
• Viewing and Configuring Switch WLANs
• Viewing Associated MU Details
• Viewing Access Port Information
• Viewing Access Port Adoption Defaults
• Viewing Access Port Status
4.1 Displaying the Network Interface
The main Network interface displays a high-level overview of the configuration (default or otherwise) as
defined within the Network main menu. Use the information to determine what items require additional
configuration using the sub-menu items under the main Network menu item.
NOTE: HTTPS must be enabled to access the switch applet. Ensure HTTPS access has
been enabled before using the login screen to access the switch applet.
NOTE: When the switch’s configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen’s Status
field and the screen remains displayed. In the case of file transfer operations, the transfer
screen remains open during the transfer operation and remains open upon completion
(with status displayed within the Status field).