Specifications

Switch Management 7-7
To review existing SNMP v3 definitions:
1. Select Management Access > SNMP Access from the main menu tree.
2. Select the V3 tab from within the SNMP Access screen.
3. Refer to the fields within the V3 screen for the following information:
CAUTION: The 3.x version WS5100 switch uses 3 unique (default) SNMPv3 user names
and passwords for MD5 authentication and DES privacy. If upgrading your configuration
from a 1.4.x or 2.x baseline, you will need to change your SNMPv3 usernames and
passwords to ensure SNMPv3 interoperation.
The unique SNMPv3 usernames and passwords include:
username = snmpoperator/password = operator
username = snmpmanager/password = symboladmin
username = snmptrap/password = symboladmin
User Name Displays a read-only SNMP v3 username of operator or Admin. Operator typically has an
Access Control of read-only and Admin typically has an Access Control of read/write.
Access Control Displays a read-only (R) access or read/write (RW) access for the v3 user. Read-only access
allows the user (when active) to retrieve information, while read/write access grants the user
modification privileges.
Authentication Displays the current authorization scheme used by this user for v3 access to the switch. Click
the Edit button to modify the password required to change the authentication keys.
Encryption Displays the current Encryption Standard (DES) protocol the user must adhere to for SNMP v3
access to the switch. Click the
Edit button to modify the password required to change the
encryption keys.
Status Displays whether this specific SNMP v3 User Name is currently active on the switch. For more
information, see Accessing SNMP v2/v3 Statistics on page 7-9.
!