Specifications

Switch Security 6-49
6.8.2 Defining the IPSec VPN Remote Configuration
Use the IPSec VPN Remote tab to configure the DNS and/or WINS Servers used to route packets to the
remote end of the IPSec VPN tunnel. The Remote is also used for defining the IP address range used within
the IPSec VPN tunnel and configuring the user authentication scheme for user permissions within the IPSec
VPN tunnel.
To define the IPSEc VPN remote configuration:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Remote tab.
3. Refer to the Configuration field to define the following information.
4. Click the IP Range tab to view the following information.
DNS Server Enter the numerical IP address of the DNS Server used to route information to the remote
destination of the IPSec VPN.
WINS Server Enter the numerical IP address of the WINS Server used to route information to the remote
destination of the IPSec VPN.
Apply Click
Apply to save any updates you may have made to the screen.
Revert Click the
Revert button to disregard any changes you have made and revert back to the last
saved configuration.
Index Enter the index assigned to the range of IP addresses displayed in the Starting and Ending IP
Address ranges. This index is used to differentiate the index from others with similar IP
addresses.