Specifications

6-24 WS5100 Series Switch System Reference Guide
6.5.3 Attaching an ACL
Use the Attach-L2/L3 screen to view and assign the ACL to a physical interface or VLAN on the switch.
To attach an interface:
1. Select Security > ACLs from the main menu tree.
2. Click the Attach-L2/L3 tab.
3. Refer to the following information as displayed within the Attach tab:
4. Select an interface and click on Edit to modify the ACL interface, IP ACL and MAC ACL values.
5. Select an interface and click the Delete button to delete the interface configuration from the switch.
6. Click on Add button to add an physical or VLAN interface to the switch. For more information, see Adding
a New ACL Configuration on page 6-24.
6.5.3.1 Adding a New ACL Configuration
After creating an ACL, it can be applied to one or more interfaces. On a Layer 3 interface it can be applied in
either an outbound or inbound direction, and only in inbound direction on a Layer 2 interface. To add an ACL
interface to the switch:
1. Select Security > ACLs from the main menu tree.
Interface The interface to which the switch is configured. It can be one of the following:
•eth1
•eth2
• vlan1 (or any additional VLANs that have been created)
• tunnel n (where n equals the name(s) of those tunnels created thus far).
IP ACL Displays the IP ACL configured as the inbound IP for the layer 2 or layer 3 interface.
MAC ACL Displays the MAC ACL to be configured as the MAC IP for the layer 2 interface.