Specifications

6-8 WS5100 Series Switch System Reference Guide
4. The Number of Unapproved APs is simply the sum of all of Unapproved Radio MAC Addresses
detected.
5. If a Radio MAC address is listed incorrectly, highlight the Radio MAC Address and click the Allow button.
Assign an Index and complete the required device address information to move the device into the list of
approved access point MAC addresses. The number of Unapproved APs updates accordingly as devices
are added and removed.
6. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
6.2.4 Unapproved APs (Reported by MUs)
Use the Unapproved APs (Reported by MUs) tab to review unapproved access points detected by
associated MUs. The criteria for switch restriction was defined using the Security > Access Port
Intrusion Detection > Configuration screen, using the values defined within the MU Assisted Scan
field.
To view MU detected unapproved access points:
1. Select Security > Access Port Intrusion Detection from the main menu tree.
2. Click on the Unapproved APs (Reported by MUs) tab.
Last Seen (in
Seconds)
Displays the time (in seconds) the Unapproved AP was last seen on the network by the
detecting AP.
ESSID Displays the ESSID of each Unapproved AP. These ESSIDs are device ESSIDs observed on the
network, but have yet to be added to the list of Approved APs and are therefore interpreted
as a threat. If an ESSID displays on the list incorrectly, click the Allow button and add the
ESSID to a new Allowed AP index.