Specifications

Switch Security
This chapter describes the security mechanisms available to the switch. This chapter includes the following:
• Displaying the Main Security Interface
• AP Intrusion Detection
• MU Intrusion Detection
• Configuring Wireless Filters
• Configuring ACLs
• Configuring NAT Information
• Configuring IKE Settings
• Configuring IPSec VPN
• Configuring the Radius Server
• Creating Server Certificates
6.1 Displaying the Main Security Interface
Refer to main menu Security interface for a high level overview of the state of several device intrusion and
switch access permission options.
NOTE: HTTPS must be enabled to access the switch applet. Ensure that HTTPS access
has been enabled before using the login screen to access the switch applet.
NOTE: When the switch’s configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen’s Status
field and the screen remains displayed. In the case of file transfer operations, the transfer
screen remains open during the transfer operation and remains open upon completion
(with status displayed within the Status field).