Specifications

Network Setup 4-93
2. Click the Adopted AP tab.
3. Refer to the Adopted AP screen for the following information:
4. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
4.9.2 Viewing Unadopted Access Ports
Use the Unadopted AP tab for gathering device hardware address and software version information for the
access port.
To view existing Radio Configuration information:
MAC Address Displays the radio's first MAC address when it is adopted by the switch.
Model Displays s the Model Number of the access port.
Serial Displays the serial number of the access port, and is used for management purposes by the
switch. It is read-only and cannot be modified.
HW Version Displays the Hardware Version of the access port. This information can be helpful when
troubleshooting problems with the access port.
IP Address Displays the IP address of the adopted access port.
Bootloader The Bootloader value displays the software version the access port boots from. This
information can be helpful when troubleshooting problems.
WISP Version Displays the version of the interface protocol between the access port and the switch. This
information can be helpful when troubleshooting problems with the access port.
Fw Version Displays the firmware version on the access port at run time. Use this information to assess
whether the software requires an upgrade for better compatibility with the Switch.
Radio Indices Displays the indices of the radios belonging to the selected access port. These indices are
equivalent to a numerical device recognition identifier (index) for the radio.