Specifications

Network Setup 4-61
2. Click the Statistics tab.
3. Select the Last 30s checkbox to display MU statistics as gathered over the last 30 seconds.
4. Select the Last HR checkbox to display MU statistics as gathered over the last hour.
5. Refer to following details as displayed within the MU Statistics table:
6. Click the Details button to launch a screen with additional information about the selected MU. For more
information, see Viewing MU Statistics in Detail on page 4-62.
Radio Index Displays a numerical identifier used to associate a particular Radio with a set of statistics.
The Index is helpful for distinguishing the radio from other radios with a similar
configuration.
MAC Address Displays the Hardware or Media Access Control (MAC) address for the MU. The MAC
address is hard coded at the factory and cannot be modified.
WLAN Displays the name of the WLAN the MU is currently associated with. Use this information
to determine if the MU/WLAN placement best suits the intended operation and coverage
area of the MU.
Throughput Mbps Displays the average throughput in Mbps between the selected MU and the access port. The
Rx column displays the average throughput in Mbps for packets received on the selected MU
from the access port. The Tx column displays the average throughput for packets sent on the
selected MU from the access port.
Bit Speed (Avg.)
Mpbs
Displays the average bit speed in Mbps for the selected MU. This includes all packets sent
and received.
% Non Unicast Displays the percentage of the total packets for the selected MU that are non-unicast
packets. Non-unicast packets include broadcast and multicast packets.
Retries Displays the average number of retries per packet. A high number in this field could indicate
possible network or hardware problems.