Specifications

4-58 WS5100 Series Switch System Reference Guide
2. Click the Status tab.
The Status screen displays the following read-only device information for MUs interoperating within the
switch managed network.
3. Click the Details button to launch a screen with additional information about the selected MU. For more
information, see Viewing MU Details on page 4-59
Station Index Displays a numerical device recognition identifier for a specific MU.
MAC Address Each MU has a unique Media Access Control (MAC) address through which it is identified.
This address is burned into the ROM of the MU.
IP Address Displays the unique IP address for the MU. Use this address as necessary throughout the
applet for filtering and device intrusion recognition and approval.
Ready Displays whether the MU is ready for switch interoperation. Values are Yes and No.
Power Save Displays the current (read-only) Power-Save-Poll (PSP) state of the MU. The Power Save field
has two potential settings. PSP indicates the MU is operating in Power Save Protocol mode.
In PSP, the MU runs enough power to check for beacons and is otherwise inactive. CAM
indicates the MU is continuously aware of all radio traffic. CAM is recommended for MUs
transmitting with the switch’s access ports frequently and for periods of two hours or greater.
WLAN Displays the name of the switch created WLAN an MU’s associated AP is currently
interoperating with.
VLAN Displays the specific VLAN the target MU is mapped to.
Radio Index The Radio Index is a numerical device recognition identifier for MU radios. The index is
helpful to differentiate device radios when a particular MU has more than one radio.
Radio Type The Radio Type defines the radio used by the adopted MU. The switch supports 802.11b MUs
and 802.11 a/b and 802.11 a/g dual-radio MUs. The radio also supports 802.11a only and
802.11g MUs.