Specifications

4-10 WS2000 Wireless Switch System Reference Guide
2. To enable IPS, select the Enable IPS check box.
3. To enable the different signature categories that IPS uses, check the appropriate check box in the
Signature Categories group. When checked, the IPS checks for intrusion on that protocol. The
following IPS signature categories are available.
4. Select the packet direction for applying signature-categories. The signature-categories define the packet
direction - inbound, outbound, or both - when the packet is checked for any attack. Default indicates the
direction as defined in the signature-category. Bi-directional indicates that the any incoming and
outgoing packet for that protocol is checked.
TELNET POP3 IMAP
NNTP FTP SNMP
TCPDNS UDPDNS TCPRPC
UDPRPC HTTP SMTP
TCPGEN UDPGEN ICMP
TCP UDP IP