Specifications

4-8 WS2000 Wireless Switch System Reference Guide
3. Click Properties button. The Internet Protocol (TCP/IP) Properties dialog box opens
4. Click the Advanced button located at the bottom right of the dialog box. The Advanced TCP/IP Settings
dialog opens.
5. Select the WINS tab to enable it.
6. In the NetBIOS setting group, select the Default radio. You can also select the Enable NetBIOS over
TCP/IP radio.
7. Click OK in each dialog box to close it.
The LAN side PC can be accessed using this format:
\\<host-name>\<shared-drive-name>
PCs on the LAN side need not be configured.
Configuring the WS2000
Navigate to the Firewall screen using [Network Configuration] --> Firewall in the left navigation menu
tree. Click Enable NetBIOS ALG check box to select it.