Specifications

3-20 WS2000 Wireless Switch System Reference Guide
3.9 Port Configuration
Use the Port Configuration screen to enable or disable each of the 6 LAN ports and the WAN port. Use this
screen to set their Auto Negotiation mode, speed and duplex states too.
When the Auto Negotiation is enabled, the WS2000 determines the best operating speed and the duplex
states for each port. To disable this, select Disable from the Auto Negotiation drop-down list.
To select the operating speed for the port, select either 10 M or 100M from the Speed drop-down list for
each port. This value should be selected based on your network configuration.
To select the duplex mode for a port, select either Half or Full from the Duplex drop-down list. In half-duplex
mode, traffic can pass only in one direction at a time. It can be either Rx or Tx. In full-duplex mode, traffic
can pass in both direction simultaneously.