Specifications

LAN/Subnet Configuration 3-17
4. Select a Port from the pulldown menu for this IP Filtering rule to apply to. The default is All and will apply
the filtering to all ports on the switch.
5. Enter the source IP range for the filtering rule in the Src Start and Src End fields.
6. Enter the destination IP range for the filtering rule in the Dst Start and Dst End fields.
7. The In Use field will display the current state of the filtering rule. When the rule is in use it will read
YES. When the rule is not in use this field will read NO.
IGMP The Internet Group Management Protocol (IGMP) is used between IP hosts and their immediate
neighbor multicast agents to support the creation of transient groups, the addition and deletion of
members of a group, and the periodic confirmation of group membership. IGMP is an asymmetric
protocol and is specified here from the point of view of a host, rather than a multicast agent.
IPV6 IPv6 is short for “Internet Protocol Version 6". IPv6 is the “next generation” protocol designed by
the IETF to replace the current version Internet Protocol, IP Version 4 (“IPv4”).
COMPR_H COMPR_H is the Compressed Header Protocol.
RAW_IP RAW IP is used when communication is done directly to the IP layer without using any additional
protocols.
Transport Description