Specifications

A-25
SIP Module LOG_DEBUG SIP:Ack received in invalid state for call id [identifier]
SIP Module LOG_DEBUG SIP:Changing the state of the SIP session call id [identifier] to terminated
SIP Module LOG_DEBUG SIP:Changing the state of the SIP session call id [identifier] to processed
SIP Module LOG_DEBUG SIP:Removing the SIP session call id [identifier]
SIP Module LOG_DEBUG SIP:Timer expired for call id [identifier]
SIP Module LOG_DEBUG SIP: MU [addr] associated with different portal [addr]
SIP Module LOG_DEBUG SIP: SIP clean up timer called for MU [addr]
SIP Module LOG_DEBUG SIP: SIP clean up timer registered for MU [addr]
SIP Module LOG_DEBUG SIP: SIP clean up timer de-registered for MU [addr]
WIPS module LOG_DEBUG WIPS: Converting to sensors .....
WIPS module LOG_DEBUG WIPS: Resetting [MAC] .....
WIPS module LOG_DEBUG WIPS: Sending REVERT command to sensor [MAC] ...
WIPS module LOG_DEBUG WIPS: Detection started .....
WIPS module LOG_DEBUG Sending configuration to [MAC].....
WIPS module LOG_DEBUG WIPS: ACK received
WIPS module LOG_DEBUG WIPS: PINGREPLY received
WIPS module LOG_DEBUG WIPS: CONFIGREPLY received
WIPS module LOG_DEBUG WIPS: Unknown AD packet is received
WIPS module LOG_DEBUG WIPS: Adding sensor [MAC]
WIPS module LOG_DEBUG WIPS: Sensor already exists
WIPS module LOG_DEBUG “WIPS: Newly detected sensor, getting configuration...”
WIPS module LOG_DEBUG Configuration updated for [MAC]
WIPS module LOG_DEBUG Unexpected Ack received
WIPS module LOG_DEBUG Configuration received from [MAC]
WIPS module LOG_DEBUG “Converted AP [MAC] did not respond for unicast pings, removing from AP
list”
WIPS module LOG_DEBUG WIPS: Unicast ping is sent to [MAC]
AP Deny List LOG_DEBUG RF Port [MAC] is denied for adoption
AP2AP Beaconing LOG_DEBUG Num MUs data received for MU probe request = [num mus]
AP Revert LOG_DEBUG Revert image sent successfully for AP [MAC]
AP Revert LOG_DEBUG “Image found: img_id1 = [image name], id received = [image name]”
System Component Debug Level Log Message