Specifications

A-14 WS2000 Wireless Switch System Reference Guide
SIP Module LOG_ERR SIP:Bye received with NULL call id
SIP Module LOG_ERR SIP:Status message received with NULL status code
SIP Module LOG_ERR SIP:Status message received with NULL call id
SIP Module LOG_ERR SIP:Status message received for an invalid call id [identifier]
SIP Module LOG_ERR SIP:Status message received at invalid state for call id [identifier]
SIP Module LOG_ERR SIP:Status message received at invalid state for call id [identifier]
SIP Module LOG_ERR SIP:status message received with invalid error code [number]
WIPS module LOG_ERR Could not read WIPS state
WIPS module LOG_ERR Could not open socket
WIPS module LOG_ERR Could not bind to socket
WIPS module LOG_ERR Could not set socket options
WIPS module LOG_ERR Error in receiving command
WIPS module LOG_ERR Bad sensor command received
WIPS module LOG_ERR WIPS: Invalid AD command [command] received
WIPS module LOG_ERR Invalid AP MAC. Can not convert to sensor
WIPS module LOG_ERR Can not convert the non-existing AP300 [MAC] to sensor
WIPS module LOG_ERR Invalid AP MAC. Can not revert to AP
WIPS module LOG_ERR Could not revert. Sensor [MAC] was not found
WIPS module LOG_ERR Could not get free buffer
WIPS module LOG_ERR Invalid AP MAC. Can not send cfg to sensor
WIPS module LOG_ERR AD packet with invalid MAC is received
WIPS module LOG_ERR Ack from an unknown sensor
WIPS module LOG_ERR Could not remove sensor [MAC]
WIPS module LOG_ERR Config from an unknown sensor
WIPS module LOG_ERR Configuration with bad length is received from [MAC]
WIPS module LOG_ERR Unexpected config reply from [MAC]
WIPS module LOG_ERR Could not send back data
WIPS module LOG_ERR Error reading configuration
WIPS module LOG_ERR Could not find RF port [MAC]
WIPS module LOG_ERR Invalid AP MAC. Can not get sensor config
System Component
Debug
Level Log Message