Specifications

WS2000 Use Cases 12-51
He sets the channel at 1, and notes the number. Access Ports channels should be separated as much as
practical to minimize interference between them. The other engineering Access Port will use channel 4 and
the marketing Access Port will use channel 7. He then sets the Power Level at the maximum setting of
100mW.
Before he can change the channels, Leo checks the Channel Selection Mode. The default Channel
Selection mode is set under the respective radio’s default screen. The default channel selection mode for ‘b’
radio is User Selection. Leo clicks the Channel Selection Mode button do display the Channel Selection
Mode dialog.
In the dialog, he selects User Selection option and clicks the Ok button to close and return back to the AP
screen.
He also sees no reason to change the settings for Antenna Diversity, Support Short Preamble, RTS
Threshold, or Beacon Settings. These parameters control some of the broadcast mechanics of an 802.11
conversation between mobile units and Access Ports. In most cases, there is no reason to change them.