Specifications

12-36 WS2000 Wireless Switch System Reference Guide
This screen shows the subnets, their IP addresses, and the network interfaces (the 10/100BaseT ports and
the WLANs) that are currently associated with each subnet. Only the first subnet is initially enabled, so Leo
clicks on the check boxes to the left of Subnet2 and Subnet3 to enable them. He clicks the Apply button
to record his changes.
Next Leo needs to configure each of the subnets. He clicks the toggle symbol to the left of LAN in the left
menu to expand it.
12.19.1 Configuring the Engineering LAN
Leo selects Subnet1 from the choices under the LAN heading. He enters a new name for the subnet, Eng-
SN, to make it easier to recognize this subnet throughout the WS2000 interface.