Specifications

WS2000 Use Cases 12-17
12.10.2 Naming the POS Access Port
Having specified the general Access Port defaults, Clarissa goes on to name and configure the Access Port
for the POS WLAN. She selects the first Access Port in the left menu.
In the Properties section, Clarissa enters a new name for the Access Port and a brief description of its
permanent location.
In the Radio Settings section, Clarissa sets the Channel to 3. She knows that the store uses cordless phones
that transmit on channel 1. She also wants to maintain some separation between the channel used by this
Access Port and the other Access Ports at this location.
She doesn’t change any of the other settings. She clicks the Apply button to save her changes.
12.10.3 Configuring the Printer Access Port
Clarissa configures the Printer Access Port in a similar way. She give it the name “Printer AP“and a location
description. She assigns channel 6 to this Access Port, avoiding contention with the POS AP and the Cafe AP.