Specifications

12-14 WS2000 Wireless Switch System Reference Guide
After she makes this selection a new button appears, labelled “1 to Many Mappings”. She selects the “1
to Many Mappings“ button.
If Clarissa had more than one static IP address, she would have been able to assign several to the WAN
interface. This screen would be used to choose how the internal IP addresses on each subnet translated into
the selection of external IP addresses. However, she has only one external IP address. All requests from any
IP address on the store network will be translated into a request using the single public IP address for the
store.
Clarissa clicks the Ok button to confirm the mappings and then clicks the Apply button in the main screen
to confirm the NAT choices and save her choices on the switch.
12.9 Inspecting the Firewall
Clarissa selects the Firewall item in the left menu. Each of the check box items represents a type of attack
which the WS2000 can filter out. She checks to see that all of the options are enabled.