Specifications

Status & Statistics 11-9
The WLAN Summary section of the screen shows basic statistics about the currently enabled WLANs.
In the lower section of the screen, the Total Switch RF Traffic table gives summary information about RF
traffic.
To clear the RF statistics, click the Clear all RF Stats button.
Name The WLAN name.
Subnet Displays the name of the subnet that is associated with the WLANs.
MUs Displays the number of mobile units associated with this WLAN.
T-put Displays the total throughput in Megabits per second (Mbps) for each of the active WLANs.
ABS Displays the Average Bit Speed (ABS) in Megabits per second (Mbps) for each of the active
WLANs.
%NU Displays the percentage of the total packets for each active WLAN that are non-unicast
packets. Non-unicast packets include broadcast and multicast packets.
Retries Displays the average number of retries per packet. A high number in this field could indi-
cate possible network or hardware problems.
Total pkts per
second
Displays the average number of RF packets sent per second across all active
WLANs on the wireless switch. The number in black represents this statistic for
the last 30 seconds and the number in blue represents this statistic for the last
hour.
Total bits per second Displays the average bits sent per second across all active WLANs on the wire-
less switch. The number in black displays this statistic for the last 30 seconds
and the number in blue displays this statistic for the last hour.
Total associated
MUs
Displays current total number of Mobile Units associated with all the active
WLANs on the wireless switch.