Specifications

Status & Statistics 11-5
11.2.2 Subnet Stats
The Subnet Stats screens displays statistics for each of the subnets. Selecting Status & Statistics -->
Subnet Stats --> <Subnet Name> Stats from the left menu displays the following screen.
The Information portion of the Subnet Stats screen displays general information about the subnet.
• The HW address is the Media Access Control (MAC) address of the switch’s WAN port, which is set at
the factory.
• The IP addresses displayed here for the subnet connection are set on the subnet screen (Network
Configuration --> WLAN --> <subnet name>).
The Received and Transmitted portions of the screen display statistics for the cumulative packets, bytes, and
errors received and transmitted through the WAN interface since the WAN was last enabled or the switch
was last rebooted.
Received Field Description
RX Packets The total number of data packets received over the subnet
RX Bytes The total number of bytes of information received over the subnet
RX Errors The total number of errors including dropped data packets, buffer overruns, and frame errors
on inbound traffic
RX Dropped The number of data packets that failed to reach the subnet
RX Overruns The total number of buffer overruns (when packets are received faster than the subnet can
handle them)
RX Frame The total number of TCP/IP data frame errors received