Specifications

10-4 WS2000 Wireless Switch System Reference Guide
6. To enable filtering using IP, check the Enable IP Filtering check box. This option is only available only
when Trunk Port is set to Wan. To add an IP filter, click IP Filtering button. The IP Filtering dialog
appears. Set the appropriate filter and click Ok to close the dialog.
7. Click Ok on the VLAN Configuration screen to save changes.
10.2.1 Mapping WLANs to VLANs
Use the following steps to map a VLAN, that is not already a part of any subnet, to a WLAN:
1. Select the desired WLAN from the menu.
2. From the Subnet pulldown menu select none. The WLAN is now not associated with any subnet and the
VLAN field can now be edited.
3. Enter a VLAN ID in the VLAN field to map that VLAN ID to the current WLAN.
4. Click the Apply button to save the changes.