Specifications

8-4 WS2000 Wireless Switch System Reference Guide
8.2.2 Set Hotspot Configuration
Hotspots can be configured from the <WLAN Name> Hotspot Config screen. This screen allows you to
configure the different parameters to enable users to use the hotspots.
To configure the hotspot for a WLAN:
1. Set the HTTP Redirection mode to either http or https by selecting the appropriate option. When a user
successfully logs on using the hotspot, the user is redirected to a welcome screen. This selection decides
the redirection mode.
2. Set the location of the files the user is redirected to by selecting one of the Use Default Files, Use CF
Card, or Use External URL options.
To use the standard redirect HTML files, select the Use Default Files option.
To use redirect HTML files stored on a CF card loaded to the switch, use Use CF Card option. When
selected, the CF Card Files area is enabled.
To use redirect HTML files stored on a different location on the local network, use the Use External URL
option. When this option is selected, the External URL area is enabled.
Radius Server Configuration
3. By default, hotspot user authentication is performed using a RADIUS server. This server could be on the
network or you can use the onboard/local RADIUS server.
To use a RADIUS server located on the network, enter the appropriate information in the Radius
Configuration area. You must enter the IP Address, Port, and the Common Secret for at least the