Specifications

Switch Administration 7-57
3. To set the time manually, click the Set Date/Time button. A sub-window displays where you can set the
WS2000’s time.
NOTE: When NTP is enabled on the WS2000, you will not be able to set time manually.
4. To enable time service on the switch, check the Enable NTP on check box and continue with the rest
of the steps below.
5. Specify a Preferred Time Server, and optionally a First Alternate Time Server and a Second
Alternate Time Server by specifying the IP address and Port for the time service for each server. The
default port is 123. The more NTP servers specified, the greatest assurance there is of uninterrupted time
synchronization.
6. Specify a Synchronization Interval (in minutes). By default, the switch will synchronize the time every
15 minutes.
7. Click the Apply button to save any changes made on this screen.