Specifications

6-2 WS2000 Wireless Switch System Reference Guide
6.1 Configuring Administrator Access
The WS2000 Network Management System allows users to log in to perform administration tasks. The
switch administrator can change any settings within the WS2000 Network Management System. The
default login name for the switch administrator is “admin” and the initial password is “symbol”.
The WS2000 Access screen is used to configure the access to the WS2000 Wireless Switch. This screen is
used to configure the access and related parameters for the WS2000 Wireless Switch. You can also change
the administrative password from this screen. This screen can be accessed from System Configuration --
> System Settings --> WS2000 Access menu item on the left.
6.1.1 Selecting the Type of Admin Access
The WS2000 Network Management System runs from a standard Web browser. By default, any individual
on an enabled subnet or over the WAN can access the log screen by specifying one of the IP addresses
associated with the user interface. The WS2000 Access screen allows the administrator to restrict access
to the WS2000 switch from different locations. By selecting the appropriate check boxes, you, the
administrator can allow or disallow specific types of access from the WAN port or from the LAN subnets.
NOTE: When connected to the switch using multiple methods, for example, when connected through both
SSH and HTTP, saving the configuration using one of the methods will cause a disconnect from the other
method.
Choose the types of access to allow by checking the associated check box.
Access
Port
Description
Applet HTTP
80
Allows administrator access to the WS2000 Management System through a standard
HTTP web browser.
Applet HTTPS
443
Allows administrator access to the WS2000 Management System through a HTTPS
(secure) connection from a web browser.