Specifications

5-20 WS2000 Wireless Switch System Reference Guide
5. Click Apply to save changes.
This screen also provides the ability to change several advanced settings for the Access Ports. For more
information, see Advanced Access Port Settings.
5.5 Setting Default Access Port Settings
The WS2000 Network Switch can support up to six Access Port. These Access Ports can be either a 802.11a
or 802.11b radio type. When an Access Port associates with the wireless switch, the initial settings for that
Access Port are taken from the Default Access Port Setting for the appropriate radio type. Select Network
Configuration --> Wireless --> Access Ports to see the list of Default radio settings. Then select the
Default settings screen for the appropriate radio type: one of 802.11a Defaults, 802.11b Defaults, or
802.11b/g Defaults.
This screen is the 802.11a Defaults screen.
MU dB
Power Level
Adjustment
This is a Motorola specific feature. This value indicates the amount of power in dBm that the MU
should reduce its Tx power by with respect to the Tx power of the AP. This feature is used to reduce
the amount of radio noise in the environment for better reception.