Wireless Ethernet Bridge User Guide

Configuration
Section 3
WE800G 3-15
Field Description
Key Content
Key 1
Key 2
Key 3
Key 4
Enter key content in these fields. The Key
Content format is selected in the Key Input
Method field.
For the key content, the phrase is
auto-generated by the password entered in the
Passphrase field. For non-Motorola clients, you
will use these Keys (and not Passphrase) when
using WEP for security. The Key will not
automatically fill in until you have clicked
Apply.
If you have selected Hexadecimal or ASCII
formatting (in the Key Input Method field), you
can then enter your own Hexadecimal or ASCII
keys. If entering keys manually, you must also
select either WEP64 or WEP128 in the
Encryption Status field.
! For WEP64 keys, 5 case sensitive ASCII
characters are allowed or 10 hexadecimal
characters (using only characters 0-9 and
A-F).
! For WEP128 keys, 13 case sensitive ASCII
characters are allowed or 26 hexadecimal
characters (using only characters 0-9 and
A-F).
If entering a key manually, don’t leave a key
field blank or enter all 0’s. These are not secure
keys.
Apply
Click to save your settings.
Cancel
Click to cancel any changes.