Wireless Ethernet Bridge User Guide

Section 1
Overview
1-14 WE800G
LED Description
The underlined items represent network activity.
LED Condition Color Status
1. Power
ON Green The device is powered on and operating normally.
Blinking Green Firmware update is in progress.
Blinking/ON Red The power LED turns red as soon as the reset
button is depressed.
If the reset button is held down for more than five
seconds, the LED starts to blink, during which time
the WE800G’s default user name, password, and
IP address will be restored. The LED then turns off
until the reset button is released.
The power LED continuously blinks red if the
firmware is corrupted. The firmware needs to be
restored.
2. Wireless
OFF None No mobile station or AP has associated with this
device.
ON Red The wireless interface has been disabled by the
firmware.
ON/Blinking
Green Connection exists in this wireless domain/active
traffic present.
3. Device
OFF None No external Ethernet device has been attached
and detected. The Ethernet link is down.
ON/Blinking
Amber 10BaseT link detected/active traffic present.
ON/Blinking
Green 100BaseT link detected/active traffic present.