User Guide Wireless Ethernet Bridge WE800G
This device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. FCC Compliance Class B Digital Device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment.
FCC Certification The WE800G contains a radio transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC logo. Canada - Industry Canada (IC) The wireless radio of this device complies with RSS 210 and RSS 102 of Industry Canada. This Class B digital device complies with Canadian ICES-003 (NMB-003).
Contents Section 1:Overview Features ................................................................................................................ 1-2 Understanding your User Guide ......................................................................... 1-3 Box Contents ........................................................................................................ 1-4 Understanding Functions ....................................................................................
Contents Section 3:Configuration Using the Configuration Manager........................................................................3-1 Logging In ...........................................................................................................3-1 Navigation ...........................................................................................................3-2 Help, Restart, and Log Out .................................................................................
Section 1:Overview Congratulations on purchasing the Motorola Wireless Ethernet Bridge WE800G. With the WE800G, any Ethernet-equipped hardware can join a wireless home or small office network. That’s desktops, printers, peripherals, game consoles… anything with an Ethernet port. Even better, this smart device is able to seamlessly transition between two separate networks. Say, your home and office. Or home and the coffee shop. Or wherever you want to connect.
Overview Section 1 Wireless Ethernet Bridge WE800G Features The WE800G has the following features: ! Connect any Ethernet equipped device to your wireless network; for example, a gaming console, a laptop or desktop computer, or a printer ! Compatibility with both 802.11g and 802.
Overview SECTION 1 Understanding your User Guide The User Guide is divided into the following sections: Overview Describes the WE800G and its functions, the technology used, and the recommended methods for positioning the WE800G. Installation It is assumed that you will use the Installation Wizard on the CD-ROM to set up your WE800G. If not, refer to this section for instructions on getting your WE800G up and running. Once you have completed this section, your WE800G will be active and ready to work.
Overview Section 1 Box Contents Your box contains the following: Antenna Ethernet Cable CD-ROM Base Station Stand WE800G Power Supply 1-4 Quick Start Guide WE800G
Overview SECTION 1 Understanding Functions Before installing your WE800G, please take a few minutes to review the wireless networking functions described in this section. Wireless Ethernet Bridge Connectivity Your WE800G allows you to: ! Connect wired and wireless networks together ! Create your own private wireless ad-hoc network by configuring multiple clients such as laptops, each using their own WE800G The mechanics behind the connectivity are explained in the following sections.
Overview Section 1 Positioning Your Wireless Ethernet Bridge To achieve the best wireless performance, review these guidelines before deciding where to place your WE800G: ! Placing your WE800G in the physical center of your network is the best location because the antenna sends out the signal in all directions. ! Placing the WE800G in a higher location, such as on top of a cabinet, helps to disperse the signal cleanly, especially to receiving locations on upper stories.
Overview SECTION 1 Technical Specifications Your WE800G uses a radio transmission technology defined by the Institute of Electrical and Electronics Engineers (IEEE) called 802.11 or Wi-Fi (Wireless Fidelity). This 802.11 standard is subdivided into distinct categories of speed and the frequency spectrum used, designated by the lower case letter after the standard. For example, your WE800G supports both the ‘b’ and ‘g’ specifications. The 802.
Overview Section 1 Types of Networks Your WE800G can be used in several ways. The following examples illustrate the flexibility of your WE800G. Some scenarios require additional hardware. Wireless Ethernet Bridge Infrastructure Mode In this mode, the WE800G functions like a bridge, connecting wired Ethernet clients to a wireless network. This is how you will most likely use the WE800G, because it shares an Internet connection with your laptop or other wireless client.
Overview SECTION 1 Wireless Ethernet Bridge Ad-Hoc Mode This mode is very similar to the WE800G Infrastructure mode, except the WE800G will connect to other client devices using Ad-Hoc mode. One limitation of operating in this mode is that all client devices must be within wireless range of each other, as opposed to a network with an Access Point, where all wireless devices must be within range of the Access Point.
Overview Section 1 Multiple Clients Mode In this mode, the WE800G connects multiple clients to your network wirelessly.
Overview SECTION 1 Wireless Ethernet Bridge Physical Description The following sections describe the physical characteristics of the WE800G. For instructions on installing your WE800G, see Section 2: Installation. Back of WE800G The following illustration shows the WE800G back panel: - + Reset WE800G Power LAN Power Receptacle LAN Port Antenna Reset Button Antenna Feature Description Power Receptacle The receptacle where you plug in the power adapter.
Overview Section 1 Feature Description Reset Button Resets your WE800G or returns the WE800G to the default login settings. If the WE800G experiences trouble connecting to the Internet, briefly press and release the Reset button to reset the router. This retains the router’s configuration information. To reset the WE800G to the factory defaults, while the unit is powered up, press and hold the Reset button for more than five seconds.
Overview SECTION 1 Front of WE800G The following illustration shows the WE800G front panel: r we Po s les ire W 1. 2. e vic De 3. The LEDs of the WE800G indicate its operational status.
Overview Section 1 LED Description The underlined items represent network activity. LED 1. Power Condition Color Status ON Green The device is powered on and operating normally. Blinking Green Firmware update is in progress. Blinking/ON Red The power LED turns red as soon as the reset button is depressed. If the reset button is held down for more than five seconds, the LED starts to blink, during which time the WE800G’s default user name, password, and IP address will be restored.
Section 2:Installation To get your network up and running: 1 Set up your hardware. CAUTION! Use only the Motorola supplied WE800G power adapter. 2 Insert the CD-ROM for Software Setup. Follow the prompts. If you prefer to set up the Wireless Ethernet Bridge software manually, refer to the Manual Software Setup found in this section. The following sections provide detailed instructions for completing these tasks.
Installation Section 2 Antenna Installation When shipped, the antenna is already connected to the WE800G. If, for some reason, you have to detach and than re-attach the antenna to the WE800G: 1 Locate the antenna connection on the back of the Wireless Ethernet Bridge (the threaded knob). 2 Screw the antenna connector (counter-clockwise to remove, clockwise to attach) on to the threaded knob until removed or firmly seated. When attaching, do not over-tighten.
Installation Section 2 Horizontal Installation To install the Wireless Ethernet Bridge horizontally, as shown in the illustration below: WE800G 1 Place the Wireless Ethernet Bridge in the desired location. 2 Follow the procedures in “Electrical Connection to Wireless Ethernet Bridge” located later in this section to connect the WE800G.
Installation Section 2 Vertical Installation To install the Wireless Ethernet Bridge vertically, as shown in the illustration below: 2-4 1 Insert the Wireless Ethernet Bridge into the supplied base. Ensure that the antenna’s location is on top. The Wireless Ethernet Bridge’s foot slides snugly into the base to keep the WE800G stable. 2 Follow the procedures in “Electrical Connection to Wireless Ethernet Bridge” located later in this section to connect the WE800G.
Installation Section 2 Wall Mount Installation To mount the Wireless Ethernet Bridge on the wall, you must: ! Position the WE800G as specified by the local or national codes governing residential or business communications services. ! Follow all local standards for installing a network interface unit/network interface device (NIU/NID). If possible, mount the Wireless Ethernet Bridge to concrete, masonry, a wooden stud, or other solid wall material.
Installation Section 2 2 Click the Print icon or choose Print from the File menu to display the Print dialog box. (A sample print dialog appears below.) In both the Pages from and to fields, enter the page number on which the Wall Mounting Template appears. Be sure you print the template at 100% scale and that Fit to page is not checked in the Print dialog box. 3 Click OK to print the template. 4 Measure the printed template with a ruler to ensure that it is the correct size.
Installation Section 2 9 Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown: ! There must be 4.0 mm (.16 inches) between the wall and the underside of the screw head. ! The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in). 7.6 mm (.3 inches) maximum 10.5 mm (.4 inches) maximum 4.0 mm 10 Remove the front two plastic feet, nearest to the LED panel, from the bottom of the WE800G to uncover the keyholes.
Installation Section 2 Electrical Connection to Wireless Ethernet Bridge Your Wireless Ethernet Bridge does not have an On/Off power switch and will only be powered on by plugging in the power adapter. To make the electrical connection to the Wireless Ethernet Bridge: CAUTION! Use only the Motorola supplied WE800G power adapter.
Installation Section 2 Easy Software Setup Run the Installation Wizard program from the supplied CD-ROM to quickly setup your network. Once your network is up and running, refer to Section 3:Configuration for advanced configuration. Manual Software Setup If you’d prefer to manually set up your network, use this section to configure it. This section describes the physical connection of the Wireless Ethernet Bridge to your network as well as the configuration needed by your PC.
Installation Section 2 1 Using the supplied Ethernet cable, connect one end of the cable to your computer’s Ethernet adapter and the other end to the LAN port on the Wireless Ethernet Bridge: Reset Power LAN Ant enna You are now ready to configure the Wireless Ethernet Bridge. 2 2-10 To configure the Wireless Ethernet Bridge, see Section 3:Configuration.
Installation Section 2 Configure Your Computers For initial configuration, you need to initially configure the PC’s network setting to specify a static IP address for the computer that is going to communicate with the Ethernet Bridge. After initial configuration: If using DHCP Reconfigure the PC’s settings to Obtain an IP address automatically. If not using DHCP Continue to use the Static IP settings.
Installation Section 2 Configuring Windows 98SE and ME 1 Click Start. 2 Select Settings > Control Panel. 3 Double-click Network. The Network window is displayed: 4 On the Configuration tab, select the TCP/IP line the for the appropriate Ethernet adapter on your PC. There may be multiple adapters installed – choose only the one that is configured for your adapter. In the example above, a 3Com Ethernet adapter card is installed and is the appropriate choice.
Installation Section 2 5 Click Properties. The TCP/IP Properties window is displayed: 6 Click the IP Address tab. 7 Enter 192.168.30.10 into the IP Address field. 8 Enter 255.255.255.0 into the Subnet Mask field. 9 Click OK. 10 Click the Gateway tab and confirm that the Installed Gateway field is blank. 11 Click OK twice. Windows may ask for the Windows Installation disk. First check to see if the installation files are installed at c:\windows\options\cabs.
Installation Section 2 Configuring Windows 2000 2-14 1 Click Start. 2 Select Settings. 3 Select Control Panel. 4 Double-click Network and Dial-Up Connections. 5 Double-click Local Area Connection. 6 Click Properties.
Installation WE800G Section 2 7 Ensure the box next to Internet Protocol (TCP/IP) is selected. 8 Click to highlight Internet Protocol (TCP/IP) and click Properties.
Installation Section 2 9 Enter 192.168.30.10 into the IP Address field. 10 Enter 255.255.255.0 into the Subnet Mask field. 11 Click OK twice to exit and save your settings. 12 Restart your computer to save your settings. 13 Proceed to Section 3 to set up your WE800G.
Installation Section 2 Configuring Windows XP This configuration assumes you have retained the default interface for Windows XP. If you are running the ‘Classic’ interface, please follow the instructions for Windows 2000. WE800G 1 Click Start. 2 Select Settings. 3 Select Control Panel. 4 Double-click Network and Dial-Up Connections. 5 Double-click Local Area Connection.
Installation Section 2 2-18 6 Click Properties. 7 Ensure the box next to Internet Protocol (TCP/IP) is selected.
Installation Section 2 8 Click to highlight Internet Protocol (TCP/IP) and click Properties. 9 Enter 192.168.30.10 into the IP Address field. 10 Enter 255.255.255.0 into the Subnet Mask field. 11 Click OK twice to exit and save your settings. 12 Proceed to Section 3 to set up your WE800G.
Section 3:Configuration Use the information in this section to modify the Wireless Ethernet Bridge’s settings. For example you can customize features for your home network, change settings such as your user name or password, or view the status of the network. The screenshots seen here are intended for reference only; your version of firmware might differ slightly. Using the Configuration Manager Logging In 1 Once the Wireless Ethernet Bridge is connected, open your web browser.
Configuration Section 3 2 Enter the USER ID. The default factory setting is admin. 3 Enter the PASSWORD. The default factory setting is Motorola. Once you have logged in, for security reasons you should change the User ID and Password. See Configuring Device Security. 4 Click LOG IN to enter the Wireless Ethernet Bridge’s Configuration Manager.
Configuration Section 3 Help, Restart, and Log Out Click the appropriate command to execute the action. HELP Accesses Help. RESTART Restarts your session with the Configuration Manager. When Restart flashes, the change you have made requires that you restart the unit. For convenience, it is recommended that you finish all of your configuration changes and then restart the unit. LOG OUT Logs out of the Wireless Ethernet Bridge’s Configuration Manager.
Configuration Section 3 6 You will then be automatically taken to the selected Profile’s Security page where you will adjust the security settings to match the security settings found on the connecting wireless network. 7 Click Apply. 8 If necessary, click Professional to match the wireless operational settings of the wireless network to which you are connecting. 9 Click Apply if changes have been made. 10 Click Restart.
Configuration Section 3 Configure Your Wireless Security Settings Due to the limitation of the Wi-Fi WPA Test Plan, your WE800G’s factory default settings are not set at their maximum security level. Adjustments are strongly recommended to ensure that you communicate securely on your wireless network at maximum strength. Failure to configure these settings properly could compromise your network to wireless hackers.
Configuration Section 3 9 Navigate to Security screen. 10 Select Pre-Shared Key (PSK) from ESS Auth Mode options. 11 Select WEP128 from the drop down list of Encryption Status. 12 Select the Key Index and enter the Key. 13 Click APPLY and then click RESTART. Your wireless configuration is now complete for the selected Profile.
Configuration Section 3 Field or Button Description Active Profile Selection Select the Profile you want to enable. The Profile selected here activates the settings of Wireless Profile 1 or 2. If the unit is already associated with a wireless network, then the wireless connection information appears below. Wireless Connection Status Associated The unit’s successfully connected to a wireless network. Not Associated The unit is not connected to a wireless network.
Configuration Section 3 Field or Button Description Encryption Status The type of encryption used for the wireless connection. Operation Speed The supported speed of the wireless connection. Radio Signal Strength The strength of the wireless connection. A higher number is better. Radio Noise Level The amount of noise, or disturbance, experienced by the wireless connection. A smaller number is better. Apply Click to save your settings. Cancel Click to cancel any changes.
Configuration WE800G Section 3 Field or Button Description SSID The SSID of the device found. MAC Address The MAC address of the device found. Channel The channel on which the device is broadcasting. Signal Strength The Signal Strength of the device found. Wireless Mode The protocol used, 802.11b, 802.11g, or 802.11b/g. Security The security protocol used. Apply Click to save your settings. Cancel Click to cancel any changes.
Configuration Section 3 Configuring Wireless Profile 1 or 2 The Wireless Profile 1 or 2 screens enable you to adjust and save wireless connection settings to a wireless profile. Each subsection applies to either Profile. These include: ! Basic ! Security ! Advanced ! Professional Configuring Basic Wireless Settings The Wireless Profile – Basic screen enables you to setup your Network ID (SSID) (Service Set Identifier) parameters for your network.
Configuration Section 3 Field or Button Description Operational Mode When using the WE800G in Ad-Hoc mode, this feature becomes available. Select the transmission type to activate for this profile. It should match the transmission type of the wireless network to which you are connecting. Apply Click to save your settings. Cancel Click to cancel any changes. Configuring Wireless Security Settings This Wireless Profile – Security screen allows you to configure wireless security settings.
Configuration Section 3 Field Description SSID Broadcast SSID (Service Set Identifier). Broadcasts the SSID of the Wireless Ethernet Bridge to devices on your network. This option can only be disabled when Ad-Hoc is selected from Network Type on the Basic screen. The SSID Broadcast allows wireless clients, like a laptop computer, to receive the Wireless Ethernet Bridge’s SSID and then join the AdHoc network. If you don’t want the SSID to be broadcast, disable this feature. The default is enabled.
Configuration Section 3 Field Description Encryption Status Determines the type of security encryption algorithms for the Key Index. The security setting encrypts your wireless transmission. The options are: None No security. Default setting. WEP64 Wired Equivalent Privacy - 64-bit strength (provides 4 Keys) WEP128 Wired Equivalent Privacy 128-bit strength (provides 2 Keys) Motorola recommends using WEP128 because it provides a stronger security algorithm.
Configuration Section 3 Field Description Key Length The option selected determines the strength of the key; 128-bit is better. This is only available when ESS Auth Mode is set to Pre-Shared Key (PSK) and the Encryption Status is set to None. There are two options: ! ! Key Index 128-bit 64-bit Use the drop-down list here to select one of the Key Content fields below (Key 1, Key 2, etc). A maximum of four different Keys (1, 2, 3, or 4) are available.
Configuration Section 3 Field Description Key Content Enter key content in these fields. The Key Content format is selected in the Key Input Method field. Key 1 Key 2 Key 3 Key 4 For the key content, the phrase is auto-generated by the password entered in the Passphrase field. For non-Motorola clients, you will use these Keys (and not Passphrase) when using WEP for security. The Key will not automatically fill in until you have clicked Apply.
Configuration Section 3 Configuring Advanced Wireless Settings This Wireless Profile – Advanced screen enables you to turn on and off your wireless network and adjust wireless parameters. Generally, the settings here should remain at their default values. To access screen, click Wireless Profile 1 or 2 > Advanced. Field Description Radio Interface Allows you to turn on and off the wireless feature. The default is enabled. MAC Address Displays the MAC address of the unit.
Configuration Section 3 Configuring Wireless Professional Settings This Wireless Profile – Professional screen enables you to adjust wireless parameters. Generally, the settings here should remain at their default values. To access screen, click Wireless Profile 1 or 2 > Professional. Field Description Short Preamble Improves the efficiency of a network's throughput when transmitting and receiving data. Motorola recommends that you enable this feature. The default is disabled.
Configuration Section 3 Field Description 11g Protection Mode Ensures that your wireless router does not interfere with neighbor networks. 802.11g networks cause collisions on 802.11b networks, so the Protection Mode forces the 802.11g network to negotiate around the 802.11b network. The options are: Frame Bursting Disable 802.11g Protection Mode is never used. Auto 802.11g Protection Mode is used if either an 802.11b client joins the network or the WE800G detects an 802.
Configuration Section 3 Configuring Control Panel Settings The Control Panel screens enable administrative maintenance for your Wireless Ethernet Bridge, such as changing your User Name/Password, updating your firmware, or backing up your configuration.
Configuration Section 3 Field Description Connection Mode Select a connection mode. The options are DHCP or Static Assigned. If you select Static Assigned, you must enter in the IP Address, Subnet Mask, and Gateway IP information below. 3-20 Connection Status Provides current information about the Ethernet connection status of the Wireless Ethernet Bridge. IP Address This is the IP address you use to connect to the WE800G. If connecting to a DHCP server, the IP address will appear here.
Configuration Section 3 Configuring Device Security This Control Panel – Device Security screen enables you to change your User ID and password and adjust the amount of idle time. To access the screen, click Control Panel > Device Security. Field Description Login User ID Changes the User ID used for logging into the Wireless Ethernet Bridge’s Configuration Manager. It cannot be longer than 63 bytes. A blank user name is not allowed. The default is admin.
Configuration Section 3 Updating Firmware The Firmware Update screen allows you to update your WE800G’s firmware (the mechanism that controls your router’s hardware). Listed on this screen is the current version of the Model Number and Firmware Revision, which enables you to verify what version you are running. To check for a firmware update, access this website www.motorola.com/broadband/networking. To update the firmware: 3-22 1 Download the latest file to your computer.
Configuration Section 3 Saving and Restoring Configuration Settings The Control Panel – Configuration Data screen enables you to save and restore the settings that you have currently configured to a file. You can also reset the WE800G to the factory default settings. To access the screen, click Control Panel > Configuration Data. To reset the Wireless Ethernet Bridge to its original configuration; click FACTORY DEFAULTS. To backup your settings: 1 Click BACKUP.
Section 4:Troubleshooting This section details possible solutions to problems that might occur when using the Wireless Ethernet Bridge, the WE800G. Contact Us If you are unable to locate a solution here, please access our website at www.motorola.com/broadband/networking for the latest information. You can also reach us 7 days a week, 24 hours a day at 1-877-466-8646. Hardware Solutions My computer is experiencing difficulty connecting to the wireless network.
Troubleshooting Section 4 ! Ensure that you are using Ethernet cables and not telephone cables between the WE800G and your computer. See the illustration below. Ethernet cables use a wider RJ-45 style plug using 8 wires where telephone style plugs use the smaller RJ-11 style plug using 4 to 6 wires. The plug on the left is RJ-45; the plug on the right is RJ-11 – use only RJ-45. ! Ensure that your Ethernet adapter is enabled.
Troubleshooting Section 4 Software Solutions I cannot access the Configuration Manager for the WE800G. WE800G ! Verify your Ethernet connection to the WE800G. ! Verify that you are using the correct version of Internet Explorer or Netscape (Internet Explorer must be above version 5.2). ! Verify that the IP address of the PC being used to configure the router is on the same network as the router’s configuration IP address. The default IP address of WE800G is 192.168.30.1.
Troubleshooting Section 4 My WE800G cannot associate with the wireless access point/router. ! Ensure that your WE800G and the wireless access point/wireless router have the same security settings that enable your computer to access the wireless network. To adjust security settings, refer to Section 2: Configure Your Wireless Security Settings.
Section 5:Glossary A Access Point (AP) A device that provides wireless LAN connectivity to wireless clients (stations). Adapter A device or card that connects a computer, printer, or other peripheral device to the network or to some other device. A wireless adapter connects a computer to the wireless LAN. Address Translation See NAT. Ad-Hoc Network A temporary local area network connecting AP clients together, usually just for the duration of the communication session.
Glossary Section 5 BSS Basic Service Set. A configuration of Access Points that communicate with each other without resorting any infrastructure. Also known as Ad-Hoc networks. Also see ESS. C Client In a client/server architecture, a client is a computer that requests files or services such as file transfer, remote login, or printing from the server. On an IEEE 802.11b/g wireless LAN, a client is any host that can communicate with the access point. Also called a CPE.
Glossary Section 5 DHCP A Dynamic Host Configuration Protocol server dynamically assigns IP addresses to client hosts on an IP network. DHCP eliminates the need to manually assign static IP addresses by “leasing” an IP address and subnet mask to each client. It enables the automatic reuse of unused IP addresses. DMZ DeMilitarized Zone. This service opens one IP address to the Internet, usually for online gaming, and acts as a buffer between the Internet and your network.
Glossary Section 5 DSSS Direct-Sequence Spread Spectrum. DSSS is a transmission technology used in WLAN transmissions where a data signal at the sending station is combined with a higher data rate bit sequence, or chipping code, that divides the user data according to a spreading ratio. The chipping code is a redundant bit pattern for each bit that is transmitted, which increases the signal's resistance to interference.
Glossary Section 5 FTP File Transfer Protocol is a standard Internet protocol for exchanging files between computers. FTP is commonly used to download programs and other files to a computer from web pages on Internet servers. G Gateway A device that enables communication between networks using different protocols. See also router.
Glossary Section 5 Internet A worldwide collection of interconnected networks using TCP/IP. IP Internet Protocol is a set of standards that enable different types of computers to communicate with one another and exchange data through the Internet. IP provides the appearance of a single, seamless communication system and makes the Internet a virtual network. IP Address A unique 32-bit value that identifies each host on a TCP/IP network. TCP/IP networks route messages based on the destination IP address.
Glossary Section 5 Mbps Million bits per second (megabits per second). A rate of data transfer. MTU The Maximum Transmission Unit is the largest amount of data that can be transmitted in one discrete message on a given physical network. The MTU places an upper bound limit on the size of a message that can be transferred by the network in a single frame. Messages exceeding the MTU must be fragmented before transmission, and reassembled at the destination.
Glossary Section 5 PCMCIA The Personal Computer Memory Card International Association sets international standards for connecting peripherals to portable computers. Laptop computers typically have a PCMCIA slot that can hold one or two PC Cards to provide features such as Ethernet connectivity. PING A network utility that tests host reachability by sending a small packet to the host and waiting for a reply.
Glossary Section 5 R RJ-11 The most common type of connector for household or office phones. RJ-45 An 8-pin modular connector; the most common connector type for 10Base-T or 100Base-T Ethernet networks. Roaming The ability to transfer your wireless session from one AP to another AP seamlessly. ROM Read-Only Memory. Router On IP networks, a device connecting at least two networks, which may or may not be similar. A router is typically located at a gateway between networks.
Glossary Section 5 Static IP Address An IP address that is permanently assigned to a host. Normally, a static IP address must be assigned manually. The opposite of Dynamic IP Address. Station IEEE 802.11b term for wireless client. Subscriber A user who accesses television, data, or other services from a service provider. Subnet Mask A methodology that determines what the router will examine for the destination of an IP address. A router delivers packets using the network address.
Glossary Section 5 Tunnel To place packets inside other packets to send over a network. The protocol of the enclosing packet is understood by each endpoint, or tunnel interface, where the packet enters and exits the network. VPNs rely on tunneling to create a secure network.
Glossary Section 5 VPN A virtual private network is a private network that uses “virtual” connections (tunnels) routed over a public network (usually the Internet) to provide a secure and fast connection; usually to users working remotely at home or in small branch offices. A VPN connection provides security and performance similar to a dedicated link (for example, a leased line), but at much lower cost.
Visit our website at: www.motorola.
