User manual

AP User Manual January 2004
Software Release 4.1
Re-Reg Count
This field displays how many registration request messages the AP has received from the SM that
is already in session. If the number of these messages is far greater than the number from other
SMs that are both registered to the AP and in session, then this SM may have an installation
problem.
RSSI (Avg/Last)
This field displays the average and the latest RSSI (received signal strength indicator) value for the
SM.
Jitter (Avg/Last)
This field displays the average and the latest jitter value for the SM.
Power Level (Avg/Last)
This field displays the average and the latest power level set for the SM.
8.10 GPS STATUS PAGE
An example of the GPS Status screen is displayed in Figure 36.
Figure 36: GPS Status screen
If the AP is configured to Sync to Received Signal (Power Port) and is connected to a
CMMmicro, or is configured to Sync to Received Signal (Timing Port) and is connected to a
CMM2, then the GPS Status web page provides information about satellites that are seen and
tracked. See Sync Input on Page 79.
This page also displays the state of the antenna in the Antenna Status field as either Unknown or
OK. This information may be helpful in a decision of whether to climb a tower to diagnose a
perceived antenna problem.
Issue 5 Page 94 of 102