User manual

AP User Manual January 2004
Software Release 4.1
8.6 LUID SELECT PAGE
An example of an LUID Select screen is displayed in Figure 32.
Figure 32: LUID Select screen
This web page allows the operator to view the web pages of registered SMs over the RF link.
Procedure 16: Viewing web pages for a selected SM
To view the pages for a selected SM, the operator
1. visits the Sessions web page to find the LUID (logical unit ID) that identifies the SM.
2. returns to the LUID Select web page.
3. enters the LUID into the Change LUID field (if the LUID differs from the LUID shown on the
Current LUID line).
4. clicks the Change LUID button.
5. clicks View Current Subscriber Modem to access the SM.
Issue 5 Page 89 of 102