User manual

AP User Manual January 2004
Software Release 4.1
Figure 29: Configuration screen, continued
As shown in Figure 29, the Configuration page continues with the following parameters:
Webpage Auto Update
The operator enters the frequency (in seconds) for the web browser to automatically refresh the
web-based interface. The default setting is 0. The 0 setting causes the web-based interface to
never be automatically refreshed.
Airlink Security
The operator specifies the type of air link security to be used on this AP:
Encryption Disabled provides no encryption on the air link. This is the default mode.
Encryption Enabled provides encryption, using a factory-programmed secret key that
is unique for each module.
SM Scan Privacy
When the SM Scan Privacy feature is enabled, the operator can use this field to suppress the
display of data about this AP on the AP Eval Data page of all SMs that register.
Issue 5 Page 83 of 102