User manual

AP User Manual January 2004
Software Release 4.1
8.2 STATUS PAGE
An example of a Status screen is displayed in Figure 27.
Figure 27: Status screen
The Status page provides information on the operation of the module. This is the default web page
for the module.
8.2.1 Status Parameters
The Status page provides the following parameters:
Device Type
This field indicates the type of the Canopy module. Values include the frequency band of the
module, the protocol that is used, and the MAC address of the module.
Software Version
This field indicates the software release that is operated on the module, the release date of the
software, the time, and whether the module is secured by DES or AES encryption (see Security
Features on Page 19). When requesting technical support, provide the information from this field.
Software Boot Version
This field indicates the CANOPYBOOT version number.
FPGA Version
This field indicates the version of the field-programmable gate array (FPGA) on the module. When
requesting technical support, provide the information from this field.
Issue 5 Page 76 of 102