User manual

AP User Manual January 2004
Software Release 4.1
8 USER INTERFACE PAGES
The Canopy AP interface provides a series of web pages to configure and monitor the unit. The
following is a quick reference to the interface screens.
NOTE: These screens are subject to change by subsequent software versions.
Access to the web-based interface is available only through a computer that is directly connected
or connected through a network to the AP. If the computer is not connected to a network when
configuring the module on a bench, disabling the proxy setting in the computer may be required.
In the address bar of your browser, enter the IP address of the AP (default is 169.254.1.1).
8.1 QUICK START PAGE
A standard Quick Start screen is displayed in Figure 26.
Figure 26: Quick Start screen
Issue 5 Page 74 of 102