User manual

AP User Manual January 2004
Software Release 4.1
5.5.6 5.7-GHz AP Channels
Channel selections for the AP in the 5.7-GHz band depend on whether the AP is deployed in
cluster.
5.7-GHz Single AP Available U-NII Channels
A single 5.7-GHz AP can operate in the following U-NII channels, which are separated by 5-MHz
increments as advised in the caution above.
(All Frequencies in GHz)
5.745 5.765 5.785 5.805
5.750 5.770 5.790
5.755 5.775 5.795
5.760 5.780 5.800
The channels of adjacent APs should be separated by at least 20 MHz. However, 25 MHz of
separation is recommended.
5.7-GHz AP Cluster Recommended U-NII Channels
Four non-overlapping U-NII channels are recommended for use in a 5.7-GHz AP cluster:
(All Frequencies in GHz)
5.745 5.765 5.785 5.805
The fully populated cluster requires only three channels, each reused by the module that is
mounted 180° opposed. The four channels above are also used for backhaul point-to-point links.
5.7-GHz Single AP Available ISM/U-NII Channels
A single 5.7-GHz AP enabled for ISM/U-NII frequencies can operate in the following channels,
which are separated by 5-MHz increments as advised in the caution above.
(All Frequencies in GHz)
5.735 5.765 5.795 5.825
5.740 5.770 5.800 5.830
5.745 5.775 5.805 5.835
5.750 5.780 5.810 5.840
5.755 5.785 5.815
5.760 5.790 5.820
Issue 5 Page 54 of 102