User manual

AP User Manual January 2004

Software Release 4.1

local: 062403_D40.jbc remote: 062403_D40.jbc

227 Entering Passive Mode (172,16,1,1,4,2)

150 Opening BINARY mode data connection for 062403_D40.jbc

100% |*************************************| 156 KB 219.48

KB/s 00:00 ETA

226 Transfer complete.

159859 bytes sent in 00:00 (156.18 KB/s)

ftp> put 41actionlist

local: 41actionlist remote: 41actionlist

ftp: local: 41actionlist: No such file or directory

ftp> put 41actionlist.txt

local: 41actionlist.txt remote: 41actionlist.txt

227 Entering Passive Mode (172,16,1,1,4,3)

150 Opening BINARY mode data connection for 41actionlist.txt

100% |*************************************| 53 58.81

KB/s 00:00 ETA

226 Transfer complete.

53 bytes sent in 00:00 (0.25 KB/s)

ftp> exit

221 Goodbye.

Figure 19: FTP to AP for SM auto-update

2. Update the SMs in a telnet session to the AP, as shown in Figure 20.

> telnet 172.16.1.1

Trying 172.16.1.1...

Connected to 172.16.1.1.

Escape character is '^]'.

/---------\

C A N O P Y

Motorola Broadband Wireless Technology Center

Telnet+> update 41actionlist.txt

Figure 20: Telnet to AP for SM auto-update

3. In the Canopy Boot Version field of the Status page of each SM that was targeted for

update, confirm that the SM has been updated.

Issue 5 Page 49 of 102