User manual

AP User Manual January 2004
Software Release 4.1
• Accessing Subnet, which specifies the subnet mask allows managers to poll the
agents.
• Trap Address, which specifies the IP address of the NMS.
For more information about each of these fields, see the user document that supports the module.
4.7.11 Objects Defined in the Canopy Enterprise MIB
The Canopy Enterprise MIB defines objects for
• APs and BH timing masters
• SMs and BH timing slaves
• CMMmicros
AP, SM, and BH Objects
The objects that the Canopy Enterprise MIB defines for each AP and BH Timing Master are listed
in Table 4.
Table 4: Canopy Enterprise MIB objects for APs, SMs, and BHs
Object Name Value Syntax Operation Allowed
bhModulation Integer manage and/or monitor
bhTimingMode Integer manage and/or monitor
boxTemperature DisplayString monitor
bridgeEntryTimeout Integer manage and/or monitor
clearEventLog Integer manage and/or monitor
colorCode Integer manage and/or monitor
displayOnlyAccess DisplayString manage and/or monitor
fullAccess DisplayString manage and/or monitor
linkNegoSpeed DisplayString manage and/or monitor
pass1Status DisplayString monitor
pass2Status DisplayString monitor
reboot Integer manage and/or monitor
snmpMibPerm Integer manage and/or monitor
webAutoUpdate Integer manage and/or monitor
whispBoxBoot DisplayString monitor
whispBoxEsn WhispMACAddress monitor
whispBoxEvntLog EventString monitor
whispBoxFPGAVer DisplayString monitor
Issue 5 Page 31 of 102