User manual

AP User Manual

January 2004

Software Release 4.1

LIST OF TABLES

Table 1: Definitions of Canopy components.....................................................................................14

Table 2: Ranges of links with and without Passive Reflector ...........................................................15

Table 3: Categories of MIB-II objects ...............................................................................................29

Table 4: Canopy Enterprise MIB objects for APs, SMs, and BHs ....................................................31

Table 5: Canopy Enterprise MIB objects for APs and BH timing masters........................................32

Table 6: Canopy Enterprise MIB objects for SMs and BH timing slaves..........................................36

Table 7: Example 2.4-GHz channel assignment by sector...............................................................55

Table 8: Example 5.2-GHz channel assignment by sector...............................................................56

Table 9: Example 5.7-GHz channel assignment by sector...............................................................56

Table 10: Subnet masks for Network Classes A, B, and C ..............................................................58

Table 11: Status information that LEDs provide ...............................................................................62

Table 12: Module auto-sensing per MAC address ...........................................................................63

Table 13: Specifications..................................................................................................................100

LIST OF PROCEDURES

Procedure 1: Replacing the Canopy logo .........................................................................................24

Procedure 2: Denying all remote access..........................................................................................26

Procedure 3: Reinstating remote access capability..........................................................................26

Procedure 4: Installing the Canopy Enterprise MIB files ..................................................................30

Procedure 5: Auto-updating SMs......................................................................................................48

Procedure 6: Enabling spectrum analysis ........................................................................................51

Procedure 7: Invoking the low power mode......................................................................................51

Procedure 8: Fabricating an override plug........................................................................................67

Procedure 9: Regaining access to the module.................................................................................67

Procedure 10: Extending network sync ............................................................................................67

Procedure 11: Bypassing proxy settings to gain access module web pages...................................68

Procedure 12: Setting mandatory Configuration page parameters ..................................................69

Procedure 13: Setting optional Configuration page parameters.......................................................70

Procedure 14: Installing the AP ........................................................................................................70

Procedure 15: Verifying system performance...................................................................................72

Procedure 16: Viewing web pages for a selected SM ......................................................................89

Procedure 17: Testing a link .............................................................................................................90

Issue 5 Page 10 of 102