User Guide Wireless Access Point WA840G

CONFIGURATION SECTION 3

WA840G 3-19

Field Description

Subnet Mask Displays the access point’s Subnet Mask

address used to connect to your network.

If DHCP is selected, this is the Subnet Mask

Address that your access point is currently

using to access the Internet. If using Static

Assigned, enter the Subnet Mask Address here.

Gateway IP Displays the access point’s Gateway IP

Address used to connect to your network.

If DHCP is selected, this is the Gateway IP

Address that your access point is currently

using to access the Internet. If using Static

Assigned, enter the Gateway IP Address here.

Apply Click to save your settings.

Cancel Click to cancel any changes.

Configuring Device Security

This screen allows you to change your User ID and Password and

adjust the inactivity time.

To access the screen, click Control Panel > Device Security.

Field Description

the access point’s Configuration Utility. It

cannot be longer than 63 bytes. A blank user

name is not allowed. The default is admin.