User Guide Wireless Access Point WA840G

SECTION 3 CONFIGURATION
3-4 WA840G
Field or Button Description
Channel Number Identifies the channel on which the access point
communicates. Each wireless client must use
the same channel to enable communication. If
changed wirelessly, once you restart the access
point, you will lose your wireless connection.
Change the wireless device’s channel to the
new channel to log back into the access point.
The default is Channel 11.
Operation Mode Enables you to select the type of transmission
protocol your wireless network uses.
The options are:
! Compatibility (802.11b/g) – default setting
! Performance (802.11g only)
! Legacy (802.11b only)
Wireless MAC
Address
Displays the MAC address of the unit.
Apply Click to save your settings.
Cancel Click to cancel any changes.