Specifications

USER EXEC MODE COMMANDS 2 - 35
• no crypto pki [server|trustpoint] <TRUSTPOINT-NAME> {del-key {on <DEVICE-NAME>}|
on <DEVICE-NAME>}
• no logging monitor
• no page
• no service ap300 locator <MAC>
• no service [cli-tables-expand <LINE>|locator {on <DEVICE-NAME>}]
on
<DEVICE-OR-DOMAIN-
NAME>
Optional. Disconnects clients on a specified device or RF Domain
• <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, or
RF Domain.
no crypto pki Deletes all PKI authentications
[server|trustpoint]
<TRUSTPOINT-NAME>
Deletes PKI authentications, such as server certificates and trustpoints
• server – Deletes server certificates
• trustpoint – Deletes a trustpoint and its associated certificates
The following is common to the server and trustpoint parameters:
• <TURSTPOINT-NAME> – Deletes a trustpoint or its server certificate. Specify the
trustpoint name.
del-key
{on <DEVICE-NAME>}
Optional. Deletes the private key associated with a server certificate or trustpoint. The
operation will fail if the private key is in use by other trustpoints.
• on <DEVICE-NAME> – Optional. Deletes the private key on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
no logging monitor Resets terminal lines message logging levels
no page Resets wireless controller paging function to its default. Disabling the “page” command
displays the CLI command output at once, instead of page by page.
no service Disables LEDs on AP300s or a specified device in the WLAN. It also resets the CLI table
expand and MiNT protocol configurations.
no ap300 locator <MAC> Disables LEDs on AP300s
• <MAC> – Specify the MAC address of the AP300.
no service Disables LEDs on AP300s or a specified device in the WLAN. It also resets the CLI table
expand and MiNT protocol configurations.
cli-tables-expand <LINE> Resets the expand configuration of the CLI table, so that the table does not expand in
the drop-down format
locator
{on <DEVICE-NAME>}
Disables LEDs on a specified device
• on <DEVICE-NAME> – Optional. Specify the name of the AP or wireless controller.