Specifications

7 - 112 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.21.4.9data-rates
 interface radio instance
Configures the 802.11 data rates on this radio
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
data-rates [b-only|g-only|a-only|bg|bgn|gn|an|default|custom]
data-rates [b-only|g-only|a-only|bg|bgn|gn|an|default]
data-rates custom [1|2|5.5|6|9|11|12|18|24|36|48|54|mcs0-7|mcs8-15|mcs16-23|
mcs0-15|mcs8-23|mcs0-23|basic-1|basic-2| basic-5.5|basic-6|basic-9|basic-11|
basic-12|basic-18|basic-24|basic-36|basic-48|basic-54|basic-mcs0-7]]
Parameters
• data-rates [b-only|g-only|a-only|bg|bgn|gn|an|default]
• data-rates custom [1|2|5.5|6|9|11|12|18|24|36|48|54|mcs0-7|mcs8-15|mcs16-23|
mcs0-15|mcs8-23|mcs0-23|basic-1|basic-2| basic-5.5|basic-6|basic-9|basic-11|
basic-12|basic-18|basic-24|basic-36|basic-48|basic-54|basic-mcs0-7]
b-only Supports operation in the 11b only mode
g-only Uses rates that support operation in the 11g only mode
a-only Uses rates that support operation in the 11a only mode
bg Uses rates that support both 11b and 11g wireless clients
bgn Uses rates that support 11b, 11g and 11n wireless clients
gn Uses rates that support 11g and 11n wireless clients
an Uses rates that support 11a and 11n wireless clients
default Enables the default data rates according to the radio’s band of operation
custom Configures a list of data rates by specifying each rate individually. Use 'basic-' prefix before
a rate to indicate it’s used as a basic rate (For example, 'data-rates custom basic-1 basic-2
5.5 11')
• 1 – 1-Mbps
• 2 – 2-Mbps
• 5.5 – 5.5-Mbps
• 6 – 6-Mbps
• 9 – 9-Mbps
• 11 – 11-Mbps
• 12 – 12-Mbps
• 18 – 18-Mbps
• 24 – 24-Mbps